1. Keep all fasteners tight and be sure the power blower is in safe working condition. Power Up the Machine. Raise the scrub head to the transport position by stepping on. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). - Keep power cord away from heated surfaces. ▷ Support panels or any oversized workpiece to minimize the risk. To register your warranty online, visit us at • Usando uma chave de. Pulling on the. - Report machine damage or faulty operation immediately. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. Remove power cord plug from battery pack. - Do not allow children to play on or around machine. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. máquina e anulará as proteções incluídas. Follow the maintenance instructions provided on page 13 - 15 of this manual. . Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. ▷ Remove any adjusting key or wrench before turning the power tool on. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. Do not use the power socket on the wet vacuum extractor. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. local Hilti Store or online at: www.